Futansi UV curing spot light is mainly used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. UV led light source application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED beads
Advantages of UV LED spotlights such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV LED spot curing system common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
led spot curing system using high power LED beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard four channel spot curing system, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, LED spot type UV curing systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV LED spot curing does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV curing spot light cover an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UVLED emits ultraviolet light source through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

525nm green light LED spotlight UV system utilizes the specific wavelength of green light emitted by LED spotlights to interact with ultraviolet (UV) radiation. This unique combination of green light and UV radiation offers a range of benefits and applications in various industries.

In the medical field, the 525nm green light LED spotlight UV system can be used for the sterilization and disinfection of surgical instruments and hospital rooms. The green light penetrates deeply into surfaces, while the UV radiation destroys harmful microorganisms, ensuring a clean and safe environment for patients and medical staff.

In the agricultural sector, this UV system can be employed to promote plant growth and enhance photosynthesis. The green light stimulates chlorophyll production in plants, while the UV radiation activates specific plant hormones that enhance plant health and productivity. This technology can be used in greenhouses or outdoor fields to improve crop yields and quality.

Moreover, the 525nm green light LED spotlight UV system finds applications in the art and conservation fields. Green light is known to enhance certain pigments in artworks, making them more visible and vibrant. UV radiation, on the other hand, can be used to detect and identify hidden details or signatures on artworks, assisting conservators in their restoration efforts.

Additionally, this UV system can be used in forensic science to illuminate and enhance latent fingerprints or other forensic evidence. The green light helps to bring out fine details, while the UV radiation reacts with certain substances, making them visible to the naked eye.

In conclusion, the 525nm green light LED spotlight UV system offers a unique combination of green light and UV radiation, providing numerous benefits and applications across different industries. Its ability to penetrate surfaces, stimulate growth, enhance visibility, and destroy microorganisms makes it a valuable tool in various fields, including medical, agricultural, artistic, conservation, and forensic sciences.

1、Imported LED beads
Advantages of UV LED spotlights such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV LED spot curing system common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
led spot curing system using high power LED beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard four channel spot curing system, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, LED spot type UV curing systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV LED spot curing does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV curing spot light cover an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UVLED emits ultraviolet light source through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;

Futansi LED spot cure systems is mainly used for UV adhesive, UV ink, UV varnish, UV paint, UV coating and other light-sensitive materials curing role, so that its surface glossy and bright, with good weather resistance, waterproof, friction resistance, acid and alkali resistance and other high-strength protection role. UV led light source application areas are wide, mostly used in ink printing, industrial products fixed, specific applications can refer to the following:

1、optical communication industry
active devices, passive device packaging, optical fiber optical cable coating curing bonding;

2、photovoltaic new energy
photovoltaic chips, lithium battery module curing;

3、semiconductor materials
wafer chips, uv film debonding;

4、medical devices
medical catheters, syringes, endoscopes, infusion tubes and other medical devices sealing;

5、3C electronics
mobile phone parts, digital camera accessories, motor components, semiconductor chips, sensors, encoders, etc.;

6、PCB circuit board
electronic components fixed, core circuit potting, chip protection, antioxidant coating protection;

7、optical parts
lens modules, optical lenses, infrared night vision assembly bonding;

8、liquid crystal display
surface edge encapsulation.

9、laboratory materials
polymer chemistry, semiconductor materials light curing;

10、ink printing
screen printing label printing.

1、Imported LED beads
Advantages of UV LED spotlights such as high energy, strong light and long service life;

2、Single-wavelength LED ultraviolet light source
UV LED spot curing system common output of 365nm, 385nm, 395nm, 405nm, no thermal radiation;

3, UVLED curing light source without heat radiation
led spot curing system using high power LED beads, emitting 365/385/395/405nm single-band UV light source, no infrared wavelength, the irradiated substrate surface temperature rise of no more than 5 ℃, no thermal radiation damage to the substrate surface, suitable for heat-sensitive material surface drying;

4、Multi-channel working mode
Standard four channel spot curing system, according to the actual use of the situation, choose 1-4 irradiation head alone or synchronous work, no need to repeat the purchase of light source equipment, effective cost savings;

5、Low power consumption
Through the led chip for electrical energy; light energy conversion, less energy loss, low power consumption, about one tenth of the traditional UV mercury lamp, LED spot type UV curing systems can save a lot of electricity consumption each year;

6、Clean and environmental protection without pollution
UV LED spot curing does not contain mercury metal harmful substances, does not produce ozone when used, belongs to a clean and environmentally friendly energy;

7, small size, small footprint
UV curing spot light cover an area far less than the traditional UV mercury lamp lamp, can be customized shape size and irradiation area, the average size of about 1/10 of the UV lamp type, light weight, small physical strength, suitable for use in different working environments;

8、Long service life
UVLED emits ultraviolet light source through LED beads, its use time is more than 20,000h on average, compared to the traditional UV mercury lamp service life (average use time is about 800h) is much longer, can instantly light up/off led ultraviolet light source, not affected by switch closure;